Miller Arrow 25 User Manual

arrow25arrow25Fluid HeadOPERATOR’S MANUAL#1022 Arrow 25 Fluid Head

Illumination ButtonRetaining ScrewBatteryBattery DoorThe Arrow 25 Fluid Head offers high quality surface coatings, dust and moisture seals. Mille

The Arrow 25 Fluid Head can be stored for extended periods; Miller recommends storage in a Miller Soft Case and the following:◗ Remove battery.◗ Cle

www.millertripods.comMILLER CAMERA SUPPORT EQUIPMENT30 Hotham Parade Artarmon, Sydney NSW 2064 AustraliaTel: +61 2 9439 6377 Fax: +61 2 9438 2819Ema

1Features and ControlsFig. 1Sliding PlatformCamera ScrewsTilt LockTilt Drag ControlBubble Level1/4” and Pin AdaptorCamera PlateQuick Release KnobSafe

2Fig. 1Pan HandlePan Handle ClampSliding Platform LockClamp NutTilt LockPan LockThreaded StudFig. 2Features and Controls

3Thank you for purchasing the Arrow 25 Fluid Head. The Arrow 25 Fluid Head has been designed to suit payload capacities from lightweight DVCAM up to s

4Weight - kg (lb) 3.0 (6.6)Payload Range - kg (lb) 5 - 14 (11.0 - 30.9)Max Capacity - kg (lb) 25 (55.1)Tilt Drag 5 Selectable fluid drag positions +

5The operating instructions are described in six steps. Please read and understand these instructions before using this equipment. Do not omit

2. Camera Set-up2.1 Remove the CAMERA PLATE by pulling down the SAFETY TAB while rotating the QUICK RELEASE KNOB to the left. The CAMERA PLA

3. Counterbalance ControlThe counterbalance system was designed to neutralise the effect of the camera weight when it is tilted. The Arrow 25 Flu

Operating Instructions4. Pan / Tilt Drag Control.The Arrow 25 Fluid Head offers 5 selectable positions of fluid drag + zero setting in the Pan