Miller Classic Series Specifications download pdf (Page 14)

OM-252 052 Page 12

SECTION 4 − ADJUSTING HEADGEAR

 There are four headgear ad-

justments: headgear top,

tightness, distance adjust-

ment, and angle adjustment.

1 Headgear Top Adjustment

Adjusts headgear for proper

depth on the head to ensure cor-

rect balance and stability.

2 Headgear Tightness

Adjustment

Adjusts headgear for a secure fit.

To adjust, push in the adjusting

knob located on the back of the

headgear. Turn knob left or right

to obtain desired tightness.

 If adjustment is limited, it may

be necessary to remove the

comfort cushion.

3 Distance Adjustment

Adjusts the distance between the

face and the lens. To adjust, loos-

en both outside tension knobs

and press inward to free from ad-

justment slots. Move forward or

back to desired position and re-

tighten. (Both sides must be

equally positioned for proper vi-

sion.)

4 Angle Adjustment

Four pins on the right side of the

headband top provide adjustment

for the forward tilt of the helmet. To

adjust, loosen the right outside

tension adjustment knob then lift

on the control arm tab and move

it to the desired position. Retigh-

ten tension adjustment knob.

 When using the back dis-

tance adjustment position,

only the back three angle ad-

justment pins can be used.

804 793

1

2

3

4

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Comments to this Manuals

No comments